ver : a_2 update : 2012.02.01 led power plf16 series 16 watts http://www.archcorp.com.tw tel: +886-2-26989508 fax: +886-2-26981319 -1- a ll specificatio ns valid at normal inpu t voltage, full load and +25c after warm-up time unless otherwise stated. electrical specifications model no. plf16-1050 plf16-700 PLF16-350 max output wattage ( w ) 16.38w 16.8w 16.8w voltage (note1) 90-264 vac frequency (hz) 47~63 hz power factor pf>0.93 at full load (115/230 vac) current (full load) 0.6a max. (115 vac) / 0.3a max. (230 vac) inrush current 40 a max. (cold start at 230 vac) input leakage current <0.25ma voltage (v.dc.) (max) 15.6v 24v 48v operation voltage (note2) 11~15.6vdc 16.8~24vdc 33.6~48 vdc current (ma) 1050 700 350 load regulation (min-max) (typ.) 4% ripple & noise (max) (note3) 3vp-p current regulation (at 230vac) (note4) 5% output efficiency (typ) (at 230vac) 84% 86% 86% over temperature protection(optional) auto recovery over voltage protection auto recovery protection short circuit protection auto recovery isolation input-output (v.ac) 4000v operating temperature -30c?+70c (with derating) storage temperature -40c?+85c temperature coefficient 0.1%/c humidity 95% rh environment mtbf >906,500 h @ 25c (mil-hdbk-217f) dimension (l x w x h) 3.47 x 1.69 x 1.1 inches (88.0 x 43.0 x 28.0 mm ) tolerance 0.5 mm weight 150 g physical cooling method free air convection safety standards en61347 en61347-2-13 emi (conducted & radiated emission) en 55015 safety & emc ems (noise immunity) en 61547 key features ? fully isolated plasti c case with ip65 level ? constant current ? universal input: 90-264 vac ? with p.f.c. function, pf>0.93 ? high efficiency up to 86% ? turn-on delay < 250ms ? protections: over load / over voltage / short circuit . over temperature(optional) ? high reliability & double layered pcb ? 3-years product warranty
ver : a_2 update : 2012.02.01 led power plf16 series 16 watts http://www.archcorp.com.tw tel: +886-2-26989508 fax: +886-2-26981319 -2- note: mechanical dimension ( top view ) derating 1. please check the derating curve for more details. 2. this is the suitable operation region for led related applic ation.but please reconfirm spec ial electrical requirements for some specific ststem design 3. ripple & noise are measured at 20mhz of bandwidth with 0.1uf & 47uf parallel capacitor. 4. (1) current regulation < 7.5% (at 115vac input voltage) (2) current regulation < 10% (at other input voltage) pin# single 1 ac in (n) 2 ac in (l) 3 +dc out 4 -dc out
|
